kg/cm² to psi Converter

How to use the kg/cm² to psi calculator

What this calculator does. This converter translates pressure between kilograms-force per square centimeter, written kgf/cm² or commonly kg/cm², and pounds-force per square inch, written psi. It also shows equivalent kilopascals, bars, and standard atmospheres so you can cross-check a gauge specification or engineering document. It performs a unit identity only; it does not determine whether a vessel, hose, tire, pump, or hydraulic component is safe for a particular pressure.

When to use it. Use it when comparing a metric pressure gauge with a psi-rated component, reading hydraulic or pneumatic service data, checking a pump specification, or converting laboratory and maintenance records between customary and metric-style pressure units. For official conversion context, see the NIST pressure and gas-flow conversion table.

How to calculate. The calculator opens with a ready-to-use demonstration of 7 kgf/cm², so the result and a validated example XLSX workbook are immediately available. (1) Replace the value in Pressure in kilograms-force per square centimeter to convert forward. (2) Alternatively, edit Pressure in pounds per square inch to convert backward. (3) Read the primary psi result, the kgf/cm² check value, the kilopascal result, the displayed equation, and the equivalent-unit table. (4) Select Download Excel to create a workbook from the current validated state. Reset clears both pressure inputs and all calculated content; Excel export then remains unavailable until you enter a complete valid value again.

Input guide. Pressure in kilograms-force per square centimeter is a required nonnegative decimal measured in kgf/cm². Enter plain decimal notation such as 7 or 3.6; commas, scientific notation, signs other than a leading plus, and unit text are rejected to prevent ambiguous parsing. Increasing this value increases every equivalent pressure proportionally. A common mistake is treating kilogram-force as kilogram mass without the standard-gravity force definition. Pressure in pounds per square inch is the reciprocal required entry path, measured in psi. A value such as 100 is valid, and changing it recalculates kgf/cm². Do not enter “100 psi” in the box because the unit is already shown beside the control.

Output guide. Pressure in psi is the primary conversion result and is an exact unit identity subject only to display rounding. Pressure in kgf/cm² confirms the canonical metric-style value. Pressure in kilopascals expresses the same pressure in the SI-derived scale. The formula line shows which direction supplied the current value. The table columns Unit, Symbol, and Equivalent value identify each pressure scale and its current numerical equivalent. Zero means zero gauge magnitude in every listed unit; high values remain proportional but should not be interpreted as equipment ratings or recommendations.

Worked example. The startup value is 7 kgf/cm². Using 1 kgf/cm² = 98,066.5 Pa and 1 psi = 6,894.757293168 Pa gives 98,066.5 ÷ 6,894.757293168 = 14.223343 psi per kgf/cm². Therefore 7 × 14.223343 = 99.563401 psi, matching the first-open result, table, and workbook. The same state equals 686.4655 kPa and approximately 6.864655 bar.